background image

1. Introduction

1.1 This appliance is designed for use only 
with Primus 2202, 2206 and 2207 gas 
cartridges containing propane/butane gas 
mixtures or Primus liquid fuel bottles for white 
gas, Primus PowerFuel, (MSR® White Gas/
Coleman® Fuel), unleaded petrol, paraffin and 
other, equivalent fuels.

1.2 Any attempt to fit another type of gas 
cartridges or liquid fuel bottle may be 
dangerous. This may result in leakage, leading 
to injury or death.

1.3 Gas consumption: 180 ph / 8,000 Btu/h 
(approx. 2.3 kW) at 1 bar pressure. (Canada: 
Gas: 12000 Btu/h, white gas/kerosene 8000 
Btu/h)

1.4 Jet size: 0.45 mm for Primus disposable 
cartridges. Jet size: 0.37 mm for white gas 
Primus PowerFuel, (MSR® White Gas/ 
Coleman@ Fuel) and unleaded petrol. Jet size: 
0.28 mm for kerosene and similar fuels.

1.5 The appliance complies with EN 521, 
Z21.72b-2002/CSA 11.2b-2002 and CSA 
B140.9.2-1975. The CE approval (EN 521) 
regards only LP Gas.

1.6 

Ensure at all times that the hose 

between the cartridge and stove is straight, 
and cannot come in contact with the flame 
or hot gases. 

Ensure that the hose is not 

twisted or subject to abrasion.

2. Safety information (fig. 1)

2.1 Ensure that the appliance and pump seals 
(1) are in place and in good condition before 
fitting the gas cartridge or liquid fuel bottle.

2.2 The appliance may be used outdoors 
only. NEVER light or use the appliance in an 
unventilated space, indoors, in a tent, in a 
vehicle or in any other enclosed area.

2.3 The appliance must be operated on a level 
surface.

2.4 Ensure that no flammable materials or 
spilled fuel are present in the vicinity of the 
appliance (see 4.8.6 and 6.8.6).

2.5 Always fit or replace the gas cartridge/
liquid fuel bottle in a safe place. This should 
be done outside only, away from possible 
sources of ignition, such as naked flames, 
pilot lights and electric fires, and well away 
from other people.

2.6 In the event of a leak from your appliance 
(as indicated by a smell of gas, white gas 
etc.), remove the stove immediately to a 
well-ventilated location outdoors, away from 
possible sources of ignition, where the leakage 
can be investigated and corrected. Checking 
the correct operation of the appliance when 
using cartridge gas should only be carried 
out outdoors. 

NEVER

 check for leaks with a 

naked flame, use soapy water.

2.7 Never use an appliance with damaged or 
worn seals. Never use a leaking, damaged or 
malfunctioning appliance.

2.8 Never leave the appliance unattended 
when lit.

2.9 Do not allow pans to boil dry.

Summary of Contents for 328984










Reviews: