Primus Wind Power EZ Tower, Owner'S Manual

Page: 8 / 24

8 EZ Tower
TM
Owner’s Manual, Rev A
EZ Tower Parts:
Description Quantity
Tower Base 1
21 ft (6.4 m) Guy Wire Set (wire guy wire attachment plate) 1
30 ft (9.1 m) Guy Wire Set (wire guy wire attachment plate) 1
M10 x 65 mm Bolt 1
M10 Locknut 1
Cable Thimbles 8
Cable Clamps 16
Tower Base Earth Spikes 4
Arrowhead Earth Anchors 4
Earth Anchor Driving Rod 1
1- 7/8 in x 72 in (4.76 cm x 1.8 m) Tower Tubes 4
1- 7/8 in x 48 in (4.76 cm x 1.2 m) Tower Tubes 1
1- 7/8 in x 42 in (4.76 cm x 1.0 m) Tower Tubes 1
EZ TOWER PARTS & REQUIRED TOOLS
IMPORTANT: If any parts are missing from the list
shown above, call Primus Wind Power.
EZ Tower Required Tools:
Description Quantity
100 ft (30.5 m) Measuring Tape 1
5/16 in (.8 cm) Wrench, Socket or Nut Driver (preferred) 1 or 2
9/16 in (1.4 cm) Wrench or Socket 2
10 kg Hammer 1
Mallet 1
Pliers 1
Carpenters Level 1
Safety Glasses 1 pair/person
Protective Gloves 1 pair/person
IMPORTANT: Before you begin installation of your EZ
Tower be sure to have all parts and required tools.