16 EZ Tower
TM
Owner’s Manual, Rev A
TOWER ASSEMBLY
The tower is assembled in several easy steps. If this is a permanent instal-
lation, first dig a trench from the base of the tower, to where the battery is
housed.
Tower Tube Layout
1. Lay out the six tower tubes on the ground as shown on the following
page. Leave approximately 6 in (15 cm) between each tube.
Note: Drawings not to scale.
42 in (1.0 m) Top Tower Tube
Location for 21 ft (6.4 m)
guy wire attachment plate
42 in (1.0 m)
72 in (1.8 m)
48 in (1.2 m)
72 in (1.8 m)
72 in (1.8 m)
72 in (1.8 m)
72 in (1.8 m) Tower Tubes
4- 72 in (1.8 m) tubes
between top & bottom tower
48 in (1.2 m) Bottom Tower Tube
Location for 30 ft (9.1 m)
guy wire attachment plate
Guy Wire
Attachment
Plate
Summary of Contents for EZ Tower
Page 2: ......
Page 22: ...22 EZ TowerTM Owner s Manual Rev A ...
