10
9
Burst
-
Number of pictures taken each
triggering event (
only relevant if in camera mode
).
Camera Sensitivity (Sensing)
-
Motion
Detector Sensitivity. Use ‘Normal’ as default.
Number of LED’s (NUM_LED)
-
Choose
to use all LED’s for longer night vision or
less LED’s to save battery power when
the longer distance is not needed.
DELAY
-
The pre-set amount of time you
desire between photo/video recordings.
Example
: 46 LED’s will be used at night
Example
: Camera will wait 1 minute between
photo/video recordings with motion
Example
: Camera will take 3 rapid photos in a row
More LED’s
Less LED’s
Advantage
• Longer Night Illumination
• Brighter and Clearer Pictures
Drawback
• More Power Consumption
(shorter battery life)
• Greater Chance of Deer
Recognizing “Red LED Glow”
Advantage
• Less Power Cosumption
(longer battery life)
• Less Chance of Deer
Recognizing “Red LED Glow”
Drawback
• Shorter Night Illumination
• Pictures not as Bright
Primos
®
recommends using versatility of selectable LED Number to your advantage
depending on the situation. If you know where the game is going to be and can setup
the camera closer, it probably it probably makes sense to enjoy the advantages of
Less LED’S. However, when you are uncertain or need the extended night range, you
can use all of the high-output LED’s!
TIP:
It may not always be best to use ‘high sensitivity’ to see how far away you can capture
images of game. If the game is closer when the camera is triggered, you will end up with better
pictures/videos. You can learn what is best for your situation; here is a summary of the settings:
High Sensitivity
• Use when trying to detect game at further distances (
in fields or open areas with long-range visibility
)
• May use in warmer months or high heat climates so it is easier for sensor to detect difference
between body heat and outdoor temperature.
• May use when trying to capture photos of smaller game.
Normal Sensitivity
• Optimized to work best in most conditions and for normal use
Low Sensitivity
• May use if you have the camera setup in a location that is getting a lot of ‘empty’ photos
(
false triggers
)
• May use if you are getting a lot of hard-to-see long range photos of game (
more likely in colder
temperatures or with larger game
) and would like game to get closer before camera captures images.
You can adjust the sensitivity of the Passive Infrared
(PIR) Motion Sensor on your camera. The PIR
sensor detects motion AND the difference between
body heat and the outdoor temperature. Therefore,
adjusting the sensor affects the DISTANCE and
HEAT SENSITIVITY of the detection.
