Clearing SD Memory Card
Formatting the SD Card erases all images and data.
To clear photos using TRUTH
®
Cam, see
‘FORMAT’
under
‘CAMERA MENU OPTIONS’.
(Page 11)
Power Saving State
When the TRUTH
®
Camera is powered on, the LCD menu screen will
automatically turn on. If menu is left inactive (no settings changed or button
pushed) for 30 seconds, the camera will automatically switch to “RUN/ON”
mode and LCD screen will enter a power saving state.
(
NOTE:
The camera is active and ready to take photos/video when LCD is in a power saving
sleep state.
)
The LCD screen can be awakened by pressing the
RUN
/WAKE
button.
(
NOTE:
The LCD menu will not wake up from Power Saving State while the Green Status Light
is on. Wait until after Green Light turns off to WAKE up LCD screen.
)
ReCOMMeNDeD ACCeSSORIeS
1.
Padlock for door latch to prevent tampering camera settings or memory
2.
Locking Security Cable to run through case and around tree. Master Lock
®
Python
™
Adjustable Locking Cable is convenient and highly recommended.
3.
6V DC External Battery for those needing extended battery life for remote
or extremely active locations (plug into bottom of camera)
Primos
®
TRUTH
®
Cam Accessories
1.
TRUTH
®
Cam Pivoting Mount
2.
Camera Glove Protective Case
Other Accessories
2.
• Stretch Fit Neoprene
• Works with all
TRUTH
®
CAM Models
• Accessory Pouch and
SD Card Pocket
• Pivoting Camera Mount
• Fits on all TRUTH
®
CAM Models
• Allows You to Mount Camera
on ANY TREE and at virtually
ANY ANGLE
Camera Glove Protective Case
Powering Unit OFF
***LCD MENU MUST BE ON TO TURN OFF CAMERA
1.
Wake up LCD screen from power saving mode by hitting
RUN
/WAKE
button (screen will not come on when Green Status Light is illuminated)
2.
After the LCD menu screen is on, press and hold the
ON/OFF
button for
2 seconds. Screen should say PWR OFF before turning off.
Image Stamp
Step 1 (Wake Up LCD Screen)
Step 2 (Powering Unit Off)
1.
14
13
