5
English Instructions
IMPORTANT:
Read these instructions carefully and retain them for
future reference.
IMPORTANT:
Primo
reserves the right to modify the product for technical or commercial
reasons without prior notice.
IMPORTANT:
This product must be used for the purpose that it was designed for; any
misuse releases PRIMO from an y an d all respon sib ilities. Ne ve r u se rep lacement
parts othe r than th ose supplied by the PRIMO.
IMPORTANT:
Never leave your child unattended!
1. Firmly pu sh the 4 lo wer tube s throu gh the holes in the front and rear wheels,
as sho wn in fig.1 & 2. The notched end of tube should be to ward the whee l.
2. Attach the two (2) handles and then the two (2) bath support tubes as shown in
fig.3. Line up all 3 holes and screw together using 1 " X" typ e scre w on each le g .
3 . Assemble the lower shelf as shown in fig. 4. Make sure that you first lock
the bigger
“L” slot (PART "F") and then the smaller one (PART "G").
Yo u will hea r the sh e lf sna p into p lace .
4 . Assemble the higher shelf as shown in fig.5. Make sure that you first lock
the bigger
“L” slot (PART "H") and then the smaller one (PART "I").
5. Put the bath on the frame (fig.6). Insert the drainage tube to the underside of
the bath as shown (fig.7). Insert rectangular drain plug into hole inside the
bath.
6. Screw the hinges on the back of the changing top with the 4 " Z" type screws
as shown in fig.8. You can feel the pre-drilled screw holes under the fabric.
7 . Fit the changing top with the hinges assembled onto the bath and then screw the
fixed part of the h inge s th ro u gh the frame , u sin g 4 " X" type scre ws (f ig.9 ) .
8. Fit the accessory trays on the 2 shelves as shown in fig.10; slide them to the
desired position.
9. To close changing pad, lift up and the locking mechanism will release
.
(PRIMO
®
EuroSpa™ Part # 351)
Summary of Contents for 7 34970 00351 7
Page 3: ...3 ...
Page 4: ...4 PRIMO EuroSpa Part 351 ...
