Pressing the
button...
Count Up Mode
Count Down Mode
DISPLAY
EXIT
Exits Set State
Saves the start time and exits the Set State
STOP/START
INCREMENT
Increments the selected digit
Increments the selected digit
RESET
SET/CHANGE
Holding the SET/CHANGE button for 3 seconds enters
the set state, which is indicated by “ _ _:_ _ _ _” on the
display.
The selected digit will blink.
Pressing SET/CHANGE again to select the next digit.
Holding the SET/CHANGE button for 3 seconds enters
the set state, which is indicated by “ _ _:_ _ _ _” on the
display.
The selected digit will blink.
Pressing SET/CHANGE again to select the next digit.
Code Blue Timer - Timer Switch Control operating specifications
The Timer Switch Control allows a use to halt a code blue event.
Pressing the
button...
Running Mode
Halted Mode
DISPLAY
EXIT
Ignored
Places display back in clock mode
Holding down DISPLAY for a minimum of four seconds shows the last code blue time.
RESET
SET/CHANGE
Ignored
Ignored
STOP/START
INCREMENT
Halts the code blue event count at the moment the button is
pressed.
Ignored
43
XR Levo Series Digital Clocks/Timers Install Guide
Summary of Contents for XR Levo Series
