pause a code blue event.
l
Designed to fit inside a single gang box (not supplied); typically 2 1⁄4 in. x 2 3⁄4 in. x 4 in. (11.45 cm x 6.99 cm x 10.15 cm).
l
Timer Switch Control can simultaneously activate two connected timers for even more accurate event management.
l
Timer Switch Control membrane switch and wall plate clean easily and resist common cleaners and disinfectants. Be sure to
test any cleaning solutions on a small area.
Elapsed Timer - Timer Switch Control operating specifications
The timer has three operating modes and a set state. The Timer Switch Control DISPLAY button sets the timer into each mode. The
RESET button sets the timer into its set state, allowing a user to set the start time for a count up or count down event.
Clock Mode
Count-Up Mode
Count-Down Mode
Set State
10:45 02
Displays current synchronized
time
0.0:00 00
Decimal lit after the 10hr
digit
99:59 59.
Decimal lit after the 1 sec
digit
Set the start time for count
event.
Elapsed Timer - Count Mode operating specifications
The Timer Switch Control allows a user to start, stop, pause and reset the timer. When not in a count mode, the timer displays its
synchronized time.
Pressing the
button...
Clock Mode
Count Up Mode
Count Down Mode
DISPLAY
EXIT
Pressing and releasing the DISPLAY button scrolls through the various modes in the following order:
1. Clock Mode
2. Count Up Mode
3. Count Down Mode
STOP/START
INCREMENT
Ignored
Controls the count up event while in count up
mode.
If the count event is started, pressing and
releasing the STOP/START button stops and
pauses the event.
If the count event is stopped/paused, pressing
and releasing the STOP/START button resumes
the event.
Controls the count down event while in count
down mode.
If the count event is started, pressing and
releasing the STOP/START button stops and
pauses the event.
If the count event is stopped/paused, pressing
and releasing the STOP/START button resumes
the event.
11
XR Levo Series Digital Clocks/Timers Install Guide
Summary of Contents for XR Levo Series
