PS-IN202 (SS) Indicator
- 10 -
2.7 User Menu Descriptions
This section provides a more detailed description of the selections found in the User Menu
Chart. Factory-set defaults are shown in bold with a checkmark (
√
).
NAME/CODE DESCRIPTION
CODE/VALUE
S1
Baud Rate
Selects the baud rate for data transmission through the serial port
1200
4800
19200
2400
9600
√
S2
Data Bits and
Parity
Selects the number of data bits and parity of serial transmission.
"8n" = 8 data bits with no parity bit and one stop bit
"7O" = 7 data bits with odd parity bit and one stop bit
"7E" = 7 data bits with even parity bit and one stop bit
"7n" = 7 data bits with no parity bit and two stop bits
8n
√
7O
7E
7n
S3
Mode of Serial
Transmission
Selects when data will be sent out of the serial port to a printer or
computer:
“C” = Continuous Mode; Send Data continuously
“d” = demand mode; send data when a PRINT command is issued from
the printer, computer or indicator
C
d
√
S4
Display Check
Actuates the function that illuminates all digit segments, decimal points,
LCD enunciators in a test sequence. Pressing the
[ZERO]
key to scroll
down one level begins the test sequence
Press [ZERO] key to
begin sequence
S5
Disable the
lb/kg Key
Allows the lb/kg to be disabled so that an operator cannot accidentally
press the key and change the displayed units.
“0” = Disable the lb/kg key “1” = Enable the lb/kg key
0
1
√
S6
Serial Port
Mode
Selects the mode of the RS-232 serial port: Refer to Appendix B for
more information
“0” = Full Duplex Mode
“1” = Print Ticket Mode
0
1
√
S7
ID No. Enable
Allows the ID number to be disabled in the Print Ticket Mode. Valid only
when
S6
is set to “1”
“0” = Disable the ID No. “1” = Enable the ID No.
0
√
1
S8
ID No. Entry
Actuates the function that allows entry of a new ID No. Valid only when
S6
is set to “1”. Pressing the
[ZERO]
key to scroll down one level begins
the sequence.
0 - 999999
123456
√
S9
No of Line
Feeds
Actuates the function that allows entry of the desired number of line
feeds to be printed in Print Ticket Mode. Valid only when
S6
is set to “1”.
Pressing the
[ZERO]
key to scroll down one level begins the sequence.
0 – 99
8
√
S10
Handshaking
Enable
Enables hardware handshaking for Print Ticket Mode. Valid only when
S6
is set to “1”.
“0” = Disable Handshaking “1” = Enable Handshaking
0
√
1
S11
Print Header
Tells the printer to print the header information. Valid only when
S6
is set
to “1”.
“0” = Do NOT Print Header “1” = Print Header
0
√
1
