manualshive.com logo in svg

Primes CUBE, Operating Manual

Share
Download
Primes CUBE Operating Manual Download Page 15

35,0(6

Cube

15

Revision 01/2019 EN

NOTICE

Damaging/Destruction of the device
If the safety interlock is not connected, the device can be damaged or 
destroyed due to overheating.

X 

When connecting the laser control, please ensure that the laser is turned 
off in case of an interruption of the connection.

Pin diagram safety interlock 
plug (view connector side)

Pin

Wire color

Function

1

4

3

4

Black

Mutual pin

1

Brown

Connected with pin 4, when ready for 
operation

3

Blue

Connected with pin 4, when in safety 
interlock mode (absorber too hot)

Tab. 8.1:  Pin assignment of the safety interlock plug

8.2 

Micro-USB socket

You can charge the rechargeable lithium ion battery of the measuring device by plug-
ging it into the micro-USB socket on the PC. A suitable cable is included in the scope of 
delivery. When using the optional LaserDiagnosticsSoftware LDS, the device communi-
cates with the LDS via the micro-USB socket.
You will find the PRIMES USB-driver for all USB-capable devices on the PRIMES websi-
te at: https://www.primes.de/en/support/downloads/software.html.

8.3 

Bluetooth

A class 1 Bluetooth interface was integrated in the Cube. This enables a wireless con-
nection with the PC, tablet or the smartphone. When connected to a PC with a class 1 
Bluetooth stick, the range under free space conditions is approx. 100 m. After switching 
on the device, the Bluetooth connection is permanently active. When the Bluetooth 
connection is activated, the USB interface is deactivated.
When using the PRIMES Cube App for mobile devices with Android™ (not included in 
delivery), the device communicates with the app via Bluetooth. The PRIMES Cube App 
is available in the Google Play Store/Tools.

Summary of Contents for CUBE





































Reviews:

No comments

Brands by name

Popular brands

Load more brands