PRIMERGY TX200 S3, Configuration Manual

Page: 16 / 44

C Configuration Sheets of Remote management controller's Web interface
（ ）
The initial values have been unchanged.
Setting
Fan Test Sets Fan Test time.
Fan Check Time 23:00 [ ] HH:MM
Analog Fans Sets the operation at the Fan malfunction.
0 FAN1 CPU1 continue ( )shutdown-and-power-off Deley[ ]sec
1 FAN2 CPU2 continue ( )shutdown-and-power-off Deley[ ]sec
2 FAN3 SYS continue ( )shutdown-and-power-off Deley[ ]sec
3 FAN4 SYS continue ( )shutdown-and-power-off Deley[ ]sec
4 FAN5 SYS continue ( )shutdown-and-power-off Deley[ ]sec
5 FAN6 SYS continue ( )shutdown-and-power-off Deley[ ]sec
6 FAN1 SYS continue ( )shutdown-and-power-off Deley[ ]sec
7 FAN2 SYS continue ( )shutdown-and-power-off Deley[ ]sec
8 FAN PSU1 continue ( )shutdown-and-power-off Deley[ ]sec
9 FAN PSU2 continue ( )shutdown-and-power-off Deley[ ]sec
10 FAN PSU2 continue ( )shutdown-and-power-off Deley[ ]sec
（ ）
The initial values have been unchanged.
Setting
Temperature Sensor Information Sets the operation at the temperature
malfunction.
0 Systemboard continue ( )shutdown-and-power-off
1 CPU 1 continue ( )shutdown-and-power-off
2 CPU 2 continue ( )shutdown-and-power-off
3 FBD-1A continue ( )shutdown-and-power-off
4 FBD-2A continue ( )shutdown-and-power-off
5 FBD-3A continue ( )shutdown-and-power-off
6 FBD-1B continue ( )shutdown-and-power-off
7 FBD-2B continue ( )shutdown-and-power-off
8 FBD-3B continue ( )shutdown-and-power-off
9 Ambient continue ( )shutdown-and-power-off
Item Initial value
Item Initial value
*1
：
Fan settings #6 to #8 are enabled in standard configuration, while fan settings #2 to #5 and
fan settings #9 and #10 are enabled in redundant configuration.
Ｃ
.4 Parameters in the Temperature
Ｃ
.
３
Parameters in the Fans
16