![PRIMERGY TX200 S3 Configuration Manual Download Page 12](http://html1.mh-extra.com/html/primergy/tx200-s3/tx200-s3_configuration-manual_1601724012.webp)
B Configuration Sheets of BIOS Setup Utility Parameters
■
IPMI Submenu
(
)
The initial values have been unchanged.
Setting
IPMI
SEL Load
xx%
Displays percentage of stored SEL
Clear System Event Log:
Disabled
( )Enabled
Event Log Full Mode:
Overwrite
( )Maintain
iRMC Time Sync:
Enabled
( )Disabled
> System Event Log
Displays System Event Log
> SDRR Browser
Displays information of sensors
> LAN Settings
Links to LAN Settings submenu
■
LAN Settings Submenu
(
)
The initial values have been unchanged.
Setting
LAN Settings
DHCP:
Disabled
( )Enabled
Local IP address
[000.000.000.001]
IP address of iRMC
[ . . . ]
Subnet mask
[000.000.000.000]
Subnet mask
[ . . . ]
Gateway address
[000.000.000.000]
Gateway address
[ . . . ]
(
)
The initial values have been unchanged.
Setting
Setup Password
Not installed
Displays whether or not the setup
password is set.
System Password
Not installed
Displays whether or not the system
password is set.
Set Setup Password:
Press Enter
Enter the setup password.
Setup Password Lock:
Standard
( )Extended
Set System Password:
Press Enter
Enter the system password *1
System Password Mode:
System
( )Keyboard *2
System Load:
Standard
( )Diskette/CDROM Lock
Setup Prompt:
Enabled
( )Disabled
Virus Warning:
Disabled
( )Enabled ( )Confirm
Diskette Write:
Enabled
( )Disabled
Flash Write:
Enabled
( )Disabled
Item
Initial value
Item
Initial value
*1
:
Can be set when [Setup Password] is set.
*2
:
Can be set when [System Password] is set.
Item
Initial value
B
.
3
Parameters in the Security menu
12