Setting up the Printer Driver and Printing 17
Section 4: Setting up the Printer
Driver and Printing
A. SETTING UP THE PRINTER DRIVER
Once the
printer driver
has been successfully installed, you
will need to set the driver up with the appropriate print
options. Refer to the following steps to change or verify your
printer driver options:
1. Click the
Start
button, point to
Settings
, and select
Printers
. Then, click on the
EP-100 Address Printer
icon
with the right mouse button and select
Properties
if using
Windows 95/98 or
Document Defaults
if using
Windows NT.
2. In Windows 95/98, you will see several tabs from which
printer settings can be changed including
Paper
,
Device
Options
, and
Cartridge
. In Windows NT, click on the
Advanced
tab of the Document Settings window.
NOTE:
Most applications allow you to change these same printer driver
options from their "Print" and/or "Printer Setup" screens. This
means that you don't have to go back to the main printer setup
window each time you want to change a setting or option in the
printer driver. These applications will usually give you the same
choices and options, but in a slightly altered format.
3. In Windows 95/98, you must click on one of the three tabs
to see the printer setting options; each tab contains
different printer settings. In Windows NT, the EP-100
Address Printer Document Settings appear. Although each
printer driver displays the print options in a slightly
different format, the basic options are the same. Refer to
the remainder of this section for a description of each
printer driver option.
ep100.qxd 1/27/2000 1:11 PM Page 17
All manuals and user guides at all-guides.com
all-guides.com