Primera Bravo 4051, User Manual

Page: 42 / 60

38
Creating Discs
Inner Diameter
This value changes the size of the non-printed center. Larger
numbers cause the non-printed center to be larger and smaller
numbers make the non-printed center smaller. This number is
incremented by 0.1mm so a change of 10 for inner diameter
changes the diameter by 1mm. Set the diameter to 230 for
Primera TuffCoat media. To use the preset outer diameter set-
ting for Primera media select the media type from the drop
down box at the top of the printer settings area.
Color Mode
Best for Graphics mode is best used for graphical images
where accurate color reproduction is not as essential. Images
printed in this mode will look more vibrant because more ink
is being used to produce them. However, printing images of
people may produce skin tones that have a reddish tint.
Best for Photos mode is best used for photographic images
where accurate color reproduction is very essential. Images
printed in this mode will look lighter than those printed in
Photo mode. Skin tones especially will look more natural in
this mode.
NOTE:
Exact color matching of the printed discs to the screen may never
be possible since there are factors that affect this out of the drivers
control. The surface of the disc reacts with the ink in the cartridge to
produce the color. For this reason, when printing the same image to
different types of discs with different surfaces the printed output can
look entirely different.
Color Table
Adjust the Color Table setting to adjust the color matching for
any image. There are six different color tables to choose from.
Since color matching is greatly dependent on the media being
printed on, there is no reliable way to differentiate between
these tables. Experiment with all the tables and choose the one
that works best for you.
511276.qxd 3/16/2012 11:04 AM Page 38