Primera Autograph Autograph IV, User Manual, Page: 29 / 44

Using the CD Color Printer IV with Windows 21
Select the Change button to install a fresh, new ink cartridge or
to switch back and forth between a previously used color
cartridge and a previously used monochrome cartridge. After
the cartridge has been replaced according to the instructions in
Section 2-E, select either the New Cartridge Installed button or
the Old Cartridge Installed button accordingly. These
selections are necessary for the printer to accurately keep track
of ink cartridge ink levels.
Calibrate
Select this button to display options for fine-tuning the position
of your printed image and the size of a CD’s non-printable
center. The following gives a complete description of each of
the Calibration options.
When facing the printer, the
Vertical adjustment moves the
printed image toward the back of the printer if a positive
number is entered and toward the front of the printer if a
negative number is entered. The Horizontal adjustment moves
the printed image toward the left-hand side if a positive
number is entered and toward the right-hand side if a negative
number is entered. The Center Size adjustment enlarges the
non-printable center if a positive number is entered and
reduces its size if a negative number is entered. As a rule, an
adjustment of 12 pixels is equivalent to approximately 1
millimeter. Once you have entered the optimum calibration
values, you will most likely not need to change them again.
The following diagram illustrates exactly how each of these
adjustments affect the printed image.
510132.qxd 1/17/2001 10:46 AM Page 21