Primera Autograph Autograph IV, User Manual, Page: 19 / 44

Using the CD Color Printer IV with Windows 11
Section 3: Using the CD Color
Printer IV with Windows
A. CONNECTING THE PRINTER TO YOUR COMPUTER
The CD Color Printer IV is designed to be used with nearly any
IBM-PC
®
or compatible running Windows 2000/XP, or
Windows 95/98/Me.
The printer is equipped with a standard 8-bit Centronics-type
parallel port . This port is the means through which it receives
data from your computer. To connect the printer to your
computer, simply obtain a shielded, bi-directional parallel
cable, and refer to the following steps:
NOTE:
For faster printing, your computer’s parallel port mode should be set
to ECP. If you experience problems with this setting or if your
computer’s parallel port is not ECP compatible, set your computer’s
parallel port to the standard “Printer Port” setting. Refer to your
computer’s system documentation for instructions on checking and/or
changing the parallel port mode.
1. Connect the Centronics-type parallel side of the cable to the
printer. Snap the fastening clips into place.
2. Connect the other side to the back of your computer at
LPT1, LPT2, or the PARALLEL connector.
510132.qxd 11/15/01 4:04 PM Page 11