background image

10

4. How to insert the two-way mirror

WARNING

 - handle the two-way mirror with extreme 

care. Treat these surfaces like you would a lens. 
Handle using the cleaning cloth
One side of the two-way mirror has a reflective 
coating; the other side is non-reflective and faces the 
lens, indicated by a label on the glass. 

1.  Loosen the thumbscrew on the glass retainer 

and rotate 90 degrees. 

2.  Observe the label on the two-way mirror

Slide the two-way mirror into the main box 
using the felt strips as a guide. DO NOT let 
any part of the glass come into contact with 
the metal surfaces of the main box.

3.  Push the mirror all the way to the corners of 

the main box, so that glass in seated into the 
V-shape of the foam pads.

4.  Rotate the glass retainer to back to its 

original position and push towards the edge 
of the two-way mirror to create a firm hold. 
Whilst firmly holding the glass retainer in this 
position, re-tighten the thumbscrew.

     TIP: The two-way mirror can remain fitted in the 
main box when packed away for transportation. 
To clean, brush or wash loose debris away. Clean 
using only the Selvyt cleaning cloth, using non-
greasy window cleaner.

Summary of Contents for VoxBox Pro





















Reviews: