20
Reset All
With one fell swoop you can reset all settings back to
factory settings. This includes the channel map, all
Program Info, Favorite channel lists, etc. The TV
should display the Setup Wizard following reset, just
as if it was turned on out-of-the-box.
)
z
If a PIN is set, the PIN entry dialog is displayed
before the Reset All Settings dialog box, even if
Locks are temporarily off. If no PIN is set, the
dialog is displayed immediately.
System Information
Display important system information.
The information is including:
Chipset
Demod
Remote Code
Version
Audio
1.
Highlight “Audio” on the MENU control panel and
press
OK
or
►
.
2.
Press
OK
or
►
into “Digital Audio”.
3.
Press
EXIT
to exit.
Digital Audio
You can output digital audio to home theater or
similar device whose DIGITAL AUDIO INPUT
terminal is connected to the DOLBY DIGITAL OUT
(OPTICAL) terminal on the Digital HDTV Tuner.
Please select an audio of the program you are
watching and the equipment connected.
You can change the optical output to Dolby Digital or
PCM.
Item
Description
PCM
The coaxial digital audio output
terminal outputs audio signal in PCM
form. If your digital audio system does
not support Dolby Digital, select ”PCM”
Dolby
Digital
The optical digital audio output terminal
outputs audio signal in Dolby Digital
form. It reproduces sound from
surround program of digital.
Set up
Audio
Time
Channel
Caption
Parental
Digital Audio Dolby
Digital Audio Output
Dolby digital
PCM
9
Introduction
Front Panel
Digital HDTV Tuner PHD-205
POWER
CH+/UP CH-/DOWN LEFT RIGHT MENU ENTER STANDBY
ON
OFF
Display Window
Display information about Digital
Tuner Receiver.
ENTER
Chooses the items highlighted.
MENU
Display the Main Menu.
CH-/DOWN
Cycles through programmed channels and
move the on-screen highlight down.
RIGHT
Move the on-screen highlight to right.
Power
Switch the Tuner ON and OFF.
STANDBY
Turn on / off the Tuner.
CH+/UP
Cycle through programmed channels and move the
on-screen highlight up.
LEFT
Move the on-screen highlight to left.
