- 3 -
Initial Installation Guide
(5) After finish scanning, PHD-101 should lock to the first available good channel. Press “List” key
on remote control to bring up all the available scanned channels so you can select and tune to
the specific channel directly.
Special cares during PHD-101 operation:
(1) During normal unit operation, PHD-101 feels warm that is because due to the internal powerful
MPEG2 processor as well as DTV tuner module. It is perfectly normal. But reserve enough
space around the unit will improve air circulation. Eventually will help the unit last much longer.
(2) During normal operation, if it is needed to switch to different video output by changing the
position of “DTV OUT SELECT” switch. For an example, changing YPbPr to DVI output. It is
recommended to complete power on off (re-cycle the power by pushing ON/OFF button from
front panel). Otherwise, you may see new switched video is not in the right position from TV
screen because some TV can’t detect mode changing smoothly.
(3) In any case, if PHD-101 can’t accept remote control commands, or video screen stuck, please
complete re-cycle the unit. It is normally happened during DTV signal is very weak and causes
the system lock up to protect the circuit.