6
1) Body with the motor
2) Rotor
3) Cocktail bottle
4) Blades for the blender
5) Lid with a mouthpiece
6) ON buton- low speed.
7) ON buton- high speed.
BEFORE FIRST USE
·
Remove all papers, cartons, foil which secure the blender and blender's parts
·
Clean the blender following the advice in Cleaning and Maintenance chapter.
FOOD PREPARATION
Remove stones (plums, peaches, cherries etc).
Remove tough skins (melons, pineapples, cucumbers, potatoes etc).
Soft-skinned and other foods just need washing
Cut the food into small pieces (2-3 cm).
USING THE BLENDER
Put the ingredients into the cup. Pour some water. It is recommended not to fill more than ¾ of cup's capacity.
Assembly blades on a bottle Put a bottle with blades mounted on the base of the device fitting into the rotor,
then turn to lock.
Note: the blender jug need to be hold during operation.
Plug the blender to the mains.
Turn on the blender pressing the button .
When the ingredients will become the right consistency, turn off the device. Do not operate the blender for
more than 3 minutes. Wait 30 minutes before the next run.
After preparing the cocktail unscrew the set of blades of the bottle . Screw the lid with a spout.
After operation, pull out the plug from the electric socket.
CLEANING AND MAINTENANCE
Make sure the blender has been disconnected from the power source.
Clean the body with a slightly damp cloth and then wipe it dry. Do not submerge the body in water or other
liquids.
The cocktail bottles and the mouthpieces are dishwasher safe.
All elements, except for the body with the motor, are suitable for cleaning with water and a dishwashing
liquid.
S
41
SM
Summary of Contents for MIX&GO SSM41
Page 2: ...SSM41 2 1 6 7 4 3 5 ...
