14
15
Internal Filter Replacement
Countertop Filter Life
OR
1st Filter Reset
2nd Filter Reset
1. After changing the first filter, press and hold the “FILTER 1” button for 10 seconds.
You will hear 2 beeps and the filter counter indicator will reset to 3000.
2. After changing the second filter, press and hold the “FILTER 2” button for 10 seconds.
You will hear 2 beeps and the filter counter indicator will reset to 5000.
Tips After Filter Replacement:
1) Select the “Purified Water” setting and let the water run for 3-5 minutes after any filter replacement .
2) If the machine has not been used for a few days, let the water run for 3-5 minutes at the “Purified Water”
setting before making Ionized Alkaline water for consumption.
3) Consult with the installer or retailer on the purchase of filters if in question about usage or installation.
Filter Composition
Tourmaline
Tourmaline emits Far Infra Red (FIR) energy naturally. FIR produces well documented health
benefits and it also has an amazing effect on water.
The Biostone contains the semi -precious gemstone tourmaline in ceramic form,
so you get FIR on tap!
Calcium
Slightly increases the alkaline mineral content of your water and improves the taste of water.
Helps also to eliminate chlorine.
Granular Activated Carbon (GAC)
The workhorse of the filtration media. GAC is especially effective at removing chlorine, its odor
and taste, agricultural chemicals, phenol, trihalomethane and other chemical contaminants.
Silver is coated on the surface of the granular activated carbon to inhibit bacterial growth in
between use.
Fiber Filter
Filters out rust and other large particulate matter from water.
First Filter
Second Filter
Fiber Filter
Activated Carbon
Activated Carbon
Fiber Filter
Fiber Filter
Fiber Filter
Fiber Filter
Tourmaline
Fiber Filter
Activated Carbon
Activated Carbon
Fiber Filter
Fiber Filter
Fiber Filter
Fiber Filter
Calcium
When the digital filter life indicator reaches
“0000” or 1 bar only, it is time to replace your filter
