Prime Aquatic
6
Parameters setting :
Parameters would be set according to the following circular mode
in the first time; All the parameters are set and saved instantly.
First of all, make sure the controller is power on.
1. Choose HEAT/COOL mode :
Press H/C key to switch mode between HEAT and COOL in
normal working status.
2. Stop temperature setting :
Press UP or Down key in normal working status to display the
default stop temperature value, while icon °C/°F flashing, then
press UP or DOWN key to adjust the ideal stop temperature you
want. Press and hold UP or DOWN can adjust the parameter
rapidly.
3. Set DIFF and DELAY(temperature difference and
compressor delay) :
