PRIME DESIGN, A SAFE FLEET BRAND
▪
Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Phone: 651-552-8554
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: [email protected]
▪
Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
8
VRI3-FT31B
ASSEMBL
Y INSTR
UCTIONS–RIGHT SIDE RO
TA
TION
DRIVE SHAFT SEALING
10.1
Apply Silicone Sealant
to Connecting Bar ends
10.2
11.3
Place the L Post into
the bottom groove of the
Rear Crossbar, ensuring
the L Post seats into the
Crossbar’s inside bottom
groove as seen from the
front of the Rear Crossbar
11.2
Prepare the L Post by removing the hex head bolt, lock
washer, flat washer, and Bracket Clamp. Retain for
installation Steps 11.4
-
11.8.
Slide L Post Bracket Clamp
into bottom groove, then slide
into L Post Bracket as shown
11.4
Note:
The orientation of
the bolt hole faces away
from the Crossbar
Beginning with the Rear
Crossbar, loosen the bolt at the
bottom of the Auto Clamp, then
slide the Auto Clamp toward the inside
end of the Rotation Upper. Reposition
the Auto Clamp leaving a minimum
of 1/4” distance from the rubber
bumper to the edge of the Auto Clamp
Bracket as shown, then finger-tighten if
adjusting later, or torque to 80 in-lbs.
L POSTS
SEE QUICK START GUIDE FOR ADJUSTMENTS
11.1
Ensure the Auto Clamp Spring is
seated into the spring catch
NOTE:
The Auto Clamps may come preset from the factory
for packaging purposes only. To assemble the L Posts to the
Crossbars, the Auto Clamps may need to be repositioned.
Summary of Contents for VRI3-FT31B
Page 1: ......
Page 15: ...Page Intentionally Left Blank ...
