Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
3
PLR-8229 ASSEMBL
Y
INSTR
UCTIONS
2
DEPLOYPRO LOCK N GO LADDER CLAMP
ASSEMBLY SEQUENCE
Slide the Clamp base into the open
position as shown.
1
Where applicable, remove your ladder and
straps before installing the Clamp base.
NOTE: Your ladder will be needed in
Steps 4–6 for final adjustments.
Pull release levers on
both sides to open
NOTE: Ladder, Base/Rotation rack and mounted DPS are shown for
illustrative purposes only. Customer-specific models and setup will vary.
