1. Multifunction key
For battery charging.
Relays the caller's voice.
Picks up your voice input.
3. Charger connector
4. Earpiece
5. Microphone
2.Indicator Light
Switches the headset on and off
Answer incoming call
End active call
Reject incoming call by long pressing button
/
/
/
/
Getting started
Charging the battery
Pairing the Bluetooth headset to a
Bluetooth mobile phone
Introduction
Thanks for purchasing PHS-6 Bluetooth Headset. Your Bluetooth Headset is
a stylish headset that enables comfortable handsfree communication with
compatible phone that supports Bluetooth technology.
Functions & Controls
Remove all components from the package...
Bluetooth Headset (with 15 mm diameter earbud)
AC Battery Charger
User Guide
An extra earbud (18 mm diameter)
Before using the Bluetooth Headset, you need to charge the built-in
rechargeable battery for approximately 2 hours. When the battery is fully
charged, it provides up to 6 hours talking time and up to 150 hours standby
time.
1. Connect the AC battery charger cable’s jack to Bluetooth Headset’s
socket.
2. Plug the charger’s AC plug to AC outlet. When charging, the Bluetooth
Headset’s status indicator lights in solid green.
3. When the battery is fully charged, the status indicator turns off. Unplug
the charger cable from AC outlet and Bluetooth Headset.
Pairing is the process for linking the headset with your Bluetooth enabled
mobile phone. After this process is completed, you can use the Bluetooth
Headset with the paired mobile phone. The Bluetooth Headset can be
paired with up to 8 compatible phones but connected to only one phone
at a time.
1. The headset must be in off mode.
2. Press the button for at least 6 seconds. The LED light flashing rapidly,
and two high tones can be heard. Your mobile phone can now "look for"
the headset.
3. Activate the Bluetooth connection with the mobile phone according to
the mobile phone’s user’s guide.
4. Set the mobile phone to search for the Bluetooth devices according to
the mobile phone’s user’s guide.
5. Select the Bluetooth Headset from the phone menu.
6. Enter the pin code 0000 to connect (or “pair”) Bluetooth Headset to the
phone. You will hear two high tones when pairing completed.
7. Select PHS-6 from the device list on your phone. The LED will light
twice rapidly every 5 seconds with the headset connected to your
phone.
If the headset is turned on within 10 meters from several paired phones,
the headset will try to connect to the last connected phone within 10
seconds. If the headset does not connect to the last connected phone
(for example, the paired phone is turned off or it rejects the connection),
the LED will be flashing every 2.5 seconds indicating it is in power on
however not engaged status.
5
4
3
1
2
