PrimAster TwinPower PMALS 20, Operating Instructions Manual

Page: 22 / 44

20
TECHNICAL DATA
Leaf blower / Leaf vacuum
PMALS 20
TwinPower
Voltage 40 V (2x20)
No-load speed 10.000 - 12.000 min
-1
Air speed 235 km/h
Suction performance max. 12,5 m³/min
Chopping rate 10 : 1
Collection bag capacity 35 l
Weight with battery 4,4 / 3,8 kg
Noise information
Measured according to
1) EN 15503, Uncertainty K = 3dB (A); 2) 2000/14/ EG;
Sound pressure level L
pA
1)
83,6 dB(A)
Sound power level L
WA
2) 9 7,9 dB(A)
Guaranteed sound power level L
WA
2)
101 dB(A)
Vibration information
Vibration total values (triaxial vector sum) determined according to ISO EN 15503,
Uncertainty K =2,3 m/s
2
Vibration emission value a
h
5,8 m/s 2
Battery Charger CGC20G
Input voltage 220 - 240 V
Mains frequency 50 - 60 Hz
Output voltage 20 V
Output current 2 x 2 A
Rated input 140 W
Compatible batteries Typ LI 22-2 / LBB25R
Batteries LBB25R, Typ LI 22-2
Battery voltage 20 V
Battery capacity (Li-Ion) 2,5 Ah
Battery power 50 Wh
Compatible chargers CGC20G
Subject to technical alterations and amendments.
Warning: The declared vibration emission level represents the main applications of the tool. However if the tool
is used for different applications, with different accessories or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure level over the total working period.
The vibration emission level will vary because of the ways in which a power tool can be used and may increase
above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of work patterns.
SAFETY
Read and understand the operating instructions
before using the appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in the
service manual. Act responsibly toward third parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operation
refer please to our customer center
EN ENGLISH