SP33 4KVM AV Preamplifier User Guide
1
inPUt/oUtPUt
The
INPUT/OUTPUT
menu allows you to configure any of
the 15 inputs.
•
Use the
INPUT
option to select the input you want to
edit.
The menu then shows the current settings for that input
and allows you to edit them.
Option
Description
STATUS
ENABLED
or
DISABLED
to specify
whether the source can be selected
from the front panel or remote control.
ALIAS
See
To edit an input alias on this page.
AUDIO INPUT
The audio input used for the source:
NONE
,
ANALOG 1
to
10
,
EXT 7.1
,
DIGITAL 1
to
7
, or
HDMI 1
to
6
,
ARC
1
and
2
.
HDMI:
OUT1 VIDEO
Specifies which HDMI input you want
to output on
HDMI OUT 1
.
OUT 2 VIDEO
Specifies which HDMI input you want
to output on
HDMI OUT 2
.
Option
Description
OUT 1 AUDIO
Set to
TV
to pass the HDMI audio to
the TV, or
SP33
to get the SP33 4KVM
to process the audio.
2CH MODE
The default surround mode for two-
channel sources:
BYPASS
,
STEREO
,
PLIIX MOVIE
,
PLIIX MUSIC
,
NEO6
CINEMA
,
NEO6 MUSIC
, or
PARTY
.
VOLUME OFFSET Press
A
or
V
to vary the sensitivity of
the source between -12.0dB to +12.0dB
in 0.5dB steps.
AV DELAY
Can be adjusted between 0ms and
250ms to compensate for processing
delay in some displays.
TRIGGER 1-3
Can be set to
ON
or
OFF
, to set the
corresponding trigger, or
---
to leave
the value at its current setting. This
setting is only active if
INPUT S
is set
in the
CONTROL
menu; see
Trigger
settings, page 15.
2CH MODE
The default surround mode for two-
channel sources:
STEREO
,
PLIIX
MOVIE
,
PLIIX MUSIC
,
NEO6 CINEMA
,
NEO6 MUSIC
,
PARTY
, or
BYPASS
.
