3.
How to update HDVB firmware
Before installing this firmware you should start the unit up and check ABT firmware version in ‘ABOUT’
menu. Your board might already have the latest HDVB firmware!
3.1
Connect a null modem cable between the computers serial port and the SP32/SPA22, make sure
their mains switch is OFF before doing so. If an USB to RS232 adapter is used we recommend one
using the FTDI chipset, those usually works best with this kind of applications.
3.2
Hold down the ‘Standby/Mute’-button (4th from the left) on the front panel while
simultaneously turning ON the mains switch. The unit should appear dead, that is normal and an
indication that it is in programming mode.
3.3
Download “Flash Magic” from their website:
http://www.flashmagictool.com/
3.4
Install it on your computer and setup the options as in the picture, except COM port.
(Choose the COM port that you are using on your computer)
3.5
Browse for the firmware file and press start
3.6
When the download is finished, exit Flash Magic, remove the RS232 cable and restart the unit
Primare AB • Limstengatan 7 • SE-21616 Limhamn • Sweden • Tel +46 40 6548800 •
www.primare.net
