SC15 Prisma System Control Center User Guide
7
GETTING STARTED
1 Unpack the SC15
Your SC15 is supplied with:
This User Guide
The Chromecast built-in Quick Start Guide
Mains cable
IR cable
Trigger cable
Antennas for Bluetooth and Wi-Fi
C5 remote control with batteries
AC Polarity Pen
If any of these items are missing please contact your
supplier. We recommend you retain the packaging in
case you need to transport the unit at a later date.
Note that the SCI5 is supplied with a protective film on the
display glass. Remove the film for a clearer whiter display.
2 Pair the SC15 with speakers
The SC15 is designed to pair with WiSA loudspeakers,
using the using the Speaker Pairing System (SPS).
Press the SPS button on the back panel to put the SC15
into pairing mode.
Press the pairing button on the WiSA speakers to pair
the speakers with the SC15.
Analogue outputs
The SC15 provides a fixed-level or variable-level
analogue output on the ANALOG OUT output on RCA
connectors, to allow you to connect to active speakers or
an analogue recorder.
Digital outputs
The SC15 also provides a coax digital output on an RCA
connector.
l
l
l
l
l
l
l
l
l
l
3 Connect inputs
You can connect up to two analogue sources and up to
four digital sources to the inputs on the back panel.
Analogue sources
Connect an analogue source to A1, using a high
quality RCA cable.
A second analogue source can be connected to D6,
using a cable terminated in a .5mm jack plug.
Digital sources
Connect digital optical sources to the digital optical
inputs D to D using optical cables. D6 can be used
for an additional optical source.
Connect a digital coax source to D5, using a digital
RCA cable.
You can also connect a USB flash drive to the USB-A
input, and a PC or Mac to the USB-B input to use the
SC15 as an audio output device for your computer. For
more information see
PLAYING MUSIC FROM A DRIVE
OR MUSIC SERVER
, page 1.
Streaming
You can stream music wirelessly to the SC15 from a
mobile phone, tablet, computer, or other Prisma product
via Bluetooth or Wi-Fi, or via a wired Ethernet connection.
For more information see
STREAMING MUSIC FROM A
PHONE, TABLET, OR PC
, page 1.
4 Connect the antennae
Connect the two antennae supplied with the SC15 to
the ANT 1 and ANT sockets on the back panel, and
position the two antennae at a slight angle from the
vertical.
One antenna is for Bluetooth connectivity, and the other
one is for Wi-Fi connectivity.
l
l
l
l
l
5 Connect power
Plug one end of the mains cable supplied with the
SC15 into the power connector on the back panel,
and connect the other end to a wall socket.
If this cable is not suitable for your power outlets please
contact your supplier for an alternative cable.
note
: See
Phase
, page 18, for information about getting
the best sound from your SC15.
WARnInG:
Always disconnect the SC15 from the
mains power before connecting or disconnecting
any cables.
Switch on the SC15, using the switch on the back panel.
to switch on from standby
Press
O
on the front panel or remote control.
The display shows:
PRIMARE
6 Connect to Wi-Fi
When the SC15 is ready to set up the network the display
will show
Setup mode
.
Make sure Bluetooth and Wi-Fi are enabled on your
mobile device.
Install the free
Google Home
app on your mobile device.
Run
Google Home
.
It will display
new device found
,
SC15
.
Click
Set UP
and follow the instructions.
After playing a test sound you will be prompted to
connect to your home Wi-Fi network.
Select your Wi-Fi network and enter the password.
You will now be able to stream music to your SC15.
l
l
l
l
l
l
l
l
