Primare PRE60, User Manual

Page: 11 / 20

PRE60 Audiophile Preamplifier, dAC, Streamer user Guide 11
uSinG thE SEttinGS mEnuS
To display the settings menus
•
Hold down the @ button on the front panel, or press
and hold the MENU button on the remote control.
The main menu is displayed:
Device settings vol 22
Input settings
Audio settings
General settings
Network settings
This provides access to the following settings menus:
Menu Description
Input settings Allows you to configure the inputs.
Audio settings Allows you to set the balance and
volume settings.
General settings Hardware settings.
Network settings Allows you to set up the WLAN or
Ethernet network
Firmware settings Allows you to update the firmware.
For more information about each of these menus see the
following sections.
To step between settings on a menu
•
Turn the SELECTOR control on the front panel, or
press the A or V buttons on the remote control.
The current setting is shown highlighted:
Audio settings vol 22
Balance 00 LR 00
Volume default 20
Volume max 79
To change a setting
•
Press the
R
button on the front panel, or the SELECT
button on the remote control.
The current value is shown highlighted:
Audio settings vol 22
Balance 00 LR 00
Volume default
10
Volume max 79
•
Turn the SELECTOR control on the front panel, or
press the A or V buttons on the remote control, to
change the value of the setting.
As you change it the new value is shown in the menu:
Audio settings vol 22
Balance 00 LR 00
Volume default 12
Volume max 79
•
Press the
R
button on the front panel, or the SELECT
button on the remote control to save the value you
have set.
To exit from the settings menus
•
Hold down the
@
button on the front panel, or press
the
MENU
button on the remote control.
inPut SEttinGS
The
Input settings
menu allows you to customise the
inputs to suit the sources in your system.
To select a source
Set the
Input
setting to the number of the input you want
to customise:
Input settings vol 22
Input 2
Status Enabled
Alias IN2
Source offset 0
The following items then allow you to customise the
settings for that source:
Status can be changed to Disabled to remove the source
from the sources you can select.
Alias
allows you to give a name of up to six letters or
digits to each source; see below.
Source offset allows you to adjust the relative volume of
the source, b10 and -10.
Input 6
Input 6 can be configured to provide high-quality
amplification of the main channels of a surround-sound
processor, with volume control provided by the processor.
Note : This will give full-volume output.
•
Configure the
Input6
option on the
Input settings
menu to
SSP
.
Input settings vol 22
Status Enabled
Alias IN6
Source offset 0
Input 6 SSP
ConfiGuRinG thE SEttinGS