DD15 Compact Disc Transport User Guide
1
These instructions help you get the best possible sound
from your DD15.
phase
The phase of the AC supply can make a significant
difference to the sound.
Use the Polarity Pen supplied with the DD15 to verify
which pin is live on your AC power cable.
Ensure that the live pin of the AC power cable is
connected to the left-hand pin of the power connector,
viewed from the back panel:
Live
Burn-in
Your Primare will start to sound best after an initial burn-in
of approximately hours.
You will notice a further smaller improvement in sound
quality for at least another days’ playing.
rs232 and trigger
The RS input allows you to connect the DD15 to a
controller system. Use a twisted (null modem) cable. For
more information contact Primare at [email protected] or
visit www.primare.net.
The Trigger output allows the DD15 to be switched on by
other devices, such as an I15.
Using the DD15 with an i15
Your DD15 is an ideal companion to the Primare I15 CD
Prisma Integrated Amplifier. For best results link the two
products together as follows using the two cables supplied
with the DD15:
to connect the trigger cable
The Trigger cable ensures that the I15 switches on, or to
standby, when you operate the
O
button on the front panel
of the
DD15.
Connect the Trigger cable from the DD15 TRIG OUT to
the I15 TRIG IN.
Configure the I15 to
triG on
.
l
l
Factory reset
Press and hold the
O
standby button on the front panel to
display the main firmware version number.
Press and hold the
O
standby button on the front panel for
10 seconds to perform a factory reset of the DD15.
You can also do a factory reset from the Prisma app,
or from the
GEnEraL sEttinGs
menu; see
GENERAL
SETTINGS, page 1.
ADDITIONAL INFORMATION
