>
Using the A30.1 Integrated Amplifier
4
S W I T C H I N G O N A N D O F F
To switch on
• Use the switch under the left-hand edge of the front panel.
During normal operation you can leave the A30.1 switched on and in
standby.
To switch to standby
• Turn the
STANDBY
control
switch on the front panel to
STANDBY
, or
press the
STBY
button on the remote control.
To switch on from standby
• Turn the
STANDBY
control switch on the front panel to
OPERATE
.
Selecting any function with the remote control will also switch on the A30.1
from standby.
S E L E C T I N G A S O U R C E
The A30.1 Integrated Amplifier provides a choice of six inputs, labelled: B1,
B2, CD, TV, AU, and TA.
To select a source
• Turn the source selector until the source is indicated on the front panel
display.
• Alternatively, press the
SEL
A
or
SEL
V
buttons on the C30 Remote
Control to step between sources.
C H A N G I N G T H E V O L U M E
The A30.1 allows you to vary the volume from 0 (silence) to 79 (maximum
volume).
To change the volume
• Rotate the volume control on the front panel, or press the
VOL
A
or
VOL
V
buttons on the C30 Remote Control.
The current volume setting is shown on the front panel.
C H A N G I N G T H E B A L A N C E
You can change the balance of the sound between the left and right channels
to shift the position of the stereo image.
To change the balance
• Press the
MENU
button on the C30 Remote Control.
The front panel display shows the current balance setting, where -6
corresponds to the leftmost position, 0 corresponds to centre, and 6
corresponds to the rightmost position.
• Press the
VOL
A
and
VOL
V
buttons on the remote control to adjust the
balance.
• Press the
MENU
button again to revert to the normal volume display.
Alternatively the normal display will revert automatically after four seconds.
§2 Using
14/5/01, 2:00 pm
4
