P r i m a L u c e L a b i S r l
E SAT TO u s e r m a n u a l
If you change the travel measurement units from steps to mm, you will be able to insert the focuser draw tube travel di-
rectly in millimeters moving the focuser both with the slider and by using the movement buttons.
The third option in the ESATTO settings window allows you to change the unit of measurement of temperature from °C
(Celsius) to °F (Fahrenheit). The last option in the ESATTO settings allows you to change the password to connect to
ESATTO with WiFi. The default password is “primalucelab”
and, in order to change it, please make a mouse left click
on the “primalucelab” word, and you will be able to chan-
ge it. Press ENTER button of your keyboard to confirm
and you will see a new window asking you to confirm.
Press Yes button to confirm.
p a g e 1 3
ATTENTION
In the event you need to manually reset ESATTO please proceed this way: with the ESATTO not connected to USB port
and without power, press the “RST” reset button (keep it pressed for 10 seconds) and, at the same time, connect to po-
wer. The ESATTO will reboot and it will be reset to factory settings.
