P. 03
熱旋風葉
產品結構及裝拆方法
產品結構
翻蓋提手
爐蓋
透明爐罩
翻蓋轉軸
旋轉軸支承孔
爐盤提手
電源線
爐座提手
爐座
爐盤
旋轉軸支架
熱旋系統拆解
環型光波管
散熱孔
防護罩
爐盤(內不粘鍋)
旋轉軸支架
P. 20
Operation Instruction
1. Place the inner pot on the exact position of the base as indicated on the previous page.
2. Open the oven cover, choose required accessory into the pot before food is filled. Make
sure to leave some space between food and the cover.
3. Close the oven cover.
4. Power on.
5. Standby Mode
The buzzer buzzes once and entire standby mode, the display screen shows “0:00”, all
indicator lights are off; buttons of all functions can be selected now.
6. Start/Cancel button
In state of standby mode, press this button, the product starts to work after the time,
temperature or a certain function has been set; If not in standby mode, pressing this key
can directly cancel the current position and return to the standby mode.
7. In state of standby model, pressing Function button can allow you to choose the following
functions from left to right in circulation: Free Menu, Chicken, Beef, Pork, Fries, Cake.
When the oven start working, press this button without any function.
8. Press “Function” button to choose your desire cooking, the indicator light start flashing,
press time “+” , “-” to set your desire cooking time (from 1min~119mins), then press
“temperature” button to set your desire cooking temperature (allowing you to choose the
following temperatures from left to right in circulation: 90°C, 130°C, 150°C,165°C,180°C,
195°C
), set the rotating function if necessary, press “rotatable button “knob to
set your desire function. Then you can press “Start / Cancel” button to begin cooking,
green indicator and menu indicator and temperature indicator light will always on, LED
screen will show the time you setting and will begin to count down.
9. Timer “+” / “-”:
In state of standby mode or cooking process, press “Time(+)” or “Time(-)” button, the
time will increase or decrease by minutes; long press on “Time(+)” or “Time(-)” button
allows the time to increase or decrease at pace of 10 minutes.
,205°C
Install:
hold the oven cover base edge by both hand, When cover groove (Figure 4) and
oven bump (Figure3) in the same level line, push the cover until reach cover oven base
(Figure5). Turn cover clockwise so far it fits on the oven.
