Primada PCL160, Instruction Manual

Page: 17 / 26

Fault Code
Over temperature
protection
Bottom temperature
more than 150
℃
Connect the thermistor
correctly(or return to normal
temperature) power on again
E1
E2
E3
E4
E5
Fault Reason Solve
If there is any malfunction of the cooker during the cooking process, please stop using the
device and send it back to the workshop for checking and repairing.
22.Do not wash rice in the inner pot, should be placed in other containers after
cleaning and poured into the inner pot of this product, in order to avoid the
deformation of the inner pot, non-stick coating scratches.
23.If the inner pot is deformed, please do not continue to use it. Contact our after-
sales service personnel to purchase new inner pot.
24.Before putting the inner pot into the body, please confirm whether there is any
sticking of rice grains or other vegetable residues on the bottom of the inner pot and
the heating plate. If you have to remove them first, then put them into the inner pot.
25.After the inner pot is put in, it must be rotated around to ensure that the inner pot
and the heating plate are fully adhered to each other.
Daily maintenance:
26.Before cleaning this product, please confirm that the power plug has been pulled
out of the power socket, and wait for it to be completely cooled before cleaning this
product.
27.When cleaning this product, do not immerse the product in water or wash it under
the tap.
28.The anti-spill cover and steam cover should be cleaned regularly to avoid the odor
and clogging of rice.
29.When not in use for a long time, the plug should be pulled out of the socket and
stored in a ventilated and dry place.
30.If the power cord or plug is found to be damaged or broken, do not continue to use
this product. It must be replaced with special soft wires or special components
purchased from its manufacturer or designated maintenance department.
31.If any malfunction occurs, please turn off the power supply and pull the plug out of
the socket. Do not continue to use the plug. Contact our after-sales service
personnel. Do not replace non-original parts or disassemble and repair by yourself.
Bottom sensor short
circuit
Bottom sensor short
circuit
Bottom sensor short
circuit
Bottom sensor short
circuit
Connect the thermistor
correctly(or return to normal
temperature) power on again
Connect the thermistor
correctly(or return to normal
temperature) power on again
Connect the thermistor
correctly(or return to normal
temperature) power on again
Bottom temperature return to
lower than protection
temperature,power on again
EN
13
1. Impotant Safety Instructions
Bottom sensor short
circuit
Bottom sensor short
circuit
Bottom sensor short
circuit
Bottom sensor short
circuit