Parts and Assembly
IMPORTANT
THE JUICE EXTRACTOR IS EQUIPPED WITH A SAFETY INTERLOCK SWITCH. THIS IS FITTED TO PREVENT
THE MOTOR FROM BEING ACTIVATED WHILE THE MACHINE IS DISASSEMBLED.
THE MOTOR WILL NOT
RUN UNLESS THE REMOVABLE TRANSPARENT COVER IS ON SECURELY AND LOCKED INTO PLACE
WITH THE SAFETY LOCKING HANDLES.
ASSEMBLY
Before first use it is a good idea to familiarise yourself with the assembly/disassembly of the
unit.
ASSEMBLY
1. The appliance should be unplugged from the mains before assembly or disassembly.
2. Slot the pulp container into right of the machine. Slot the juice container into the left of the
machine.
3. Place the Removable White Cover onto the main body.
4. Attach the Stainless Steel filter net and blade onto the main body, through the
Removable White Cover hole, by lining up the groves on the bottom with those on the top
of the main body and pushing down until you hear it lock into place.
5. Attach the top transparent cover and place the juicer stick in the food chute.
NOTE:
Line up the two small cut out of plastic sections on the bottom of the Removable
Transparent Lid with those two indents on the top of the Removable White Cover.
6. Make sure the housing unit is locked with the safety lockers in place by hooking them
onto the top cover and pushing them downwards until they clip in place.
7.
The juicer will not work for safety reasons if the safety lockers are not locked in place
correctly.
DISASSEMBLY
1. Remove the juicer stick and the pulp and juice containers.
2. To remove the Removable Transparent Cover pull both safety lockers upwards and
outwards from the bottom. Release and lift off the top cover.
3. Lift the Removable White Cover by lifting upwards.
4.
Lift the filter net off by strongly pulling upwards.