Parts and Assembly
1. Lid stopper
2. Jug Lid
3/9. Glass jug
4. Sealing ring
5. Cutting blade
6. Blade Housing
7. Motor
Block
8.
Control switch
IMPORTANT
THE BLENDER IS EQUIPPED WITH A SAFETY INTERLOCK SWITCH. THIS IS FITTED TO PREVENT THE
MOTOR FROM BEING ACTIVATED WHILE THE MACHINE IS DISASSEMBLED.
THE MOTOR WILL NOT RUN
UNLESS THE BLENDER JUG IS PROPERLY LOCKED INTO PLACE.
ASSEMBLY
Before first use it is a good idea to familiarise yourself with the assembly/disassembly of the
unit. Note the position of the blender jug in relation to the base (as shown on the front cover of
this book):
1. The Control Switch (8) on the Motor Block (7) is to the front.
2. Line up the Glass Jug (3/9) with the handle to the right and turn slightly away from you.
3. Place the Glass Jug (3/9) onto the Motor Block (7) and twist slightly until it falls into place.
4. Turn the Glass Jug clockwise to lock into place.
Note: the base is equipped with a safety switch. The motor will not run unless the blender Glass
jug (3/9) is fitted properly.