Prima LPR 712 Instruction Booklet Download Page 21

Page: 21 / 28

Installation Instructions

Technical Specifications

It is dangerous to alter the specifications or

attempt to modify this product in any way.

Care must be taken to ensure that the appliance

does not stand on the electrical supply cable.

Any electrical work required to install this

appliance should be carried out by a qualified
electrician or competent person.

Any plumbing work required to install this

appliance should be carried out by a qualified
plumber or competent person.

DIMENSIONS Height

Width 60

Depth 54

POWER SUPPLY VOLTAGE

230-240 V/50 Hz

TOTAL POWER ABSORBED

2050 W (10A)

WATER PRESSURE

Minimum

0.05 MPa

Maximum 0.8

MPa

MAXIMUM RECOMMENDED LOAD

Cotton, linen

5 kg

Synthetics

2 kg

Delicate fabrics

2 kg

Handwash (Wool)

1 kg

SPIN SPEED

Maximum

1200 rpm

CONSUMPTION DATA FOR WASHING

Energy

0.85 kWh

5 KG of NORMALLY SOILED COTTON

Water

49 litres

ITEMS WITH THE ECONOMY

Time

130 mins

PROGRAMME

° Eco

This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

132967680.qxd 31/10/2007 14.40 Pagina 21

Summary of Contents for LPR 712





























Search results

Summary of Contents for LPR 712

Reviews:

Brands by name

Popular brands

Prima LPR 712, Instruction Booklet

Search results

Summary of Contents for LPR 712

Reviews:

Brands by name

Popular brands