Prima LE-55PA88, Instruction Manual

Page: 15 / 22

Menu List
13
Menu Time
OSD Language Select on-screen menu language.
Setting
Restore To Default
Select OSD menu display time.
Reset all settings to factory defaults.
Noise Reduction
Select the noise reduction mode to reduce picture noise (snow)You can
select
Weak, Middle, Strong, or Off .
Set up the overall brilliance of the screen.
Backlight
Color temperature
Select the color temperature. You can select Warm , Cool or Normal .
Brightness Adjust the brightness.
Contrast
Adjust the contrast.
Saturation
Adjust the color saturation.
Tint
Adjust the image hue. (Only for NTSC system)
Sharpness Adjust the sharpness.
Picture
Sc
re
en
The backlight brightness is decreased. [Off] /[Save1] / [Save2]
Energy Save
Aspect ratio
Select the aspect ratio (display proportions) according to your video signal
type or personal preference
[16:9] /[4:3] / [Panorama] / [Just Scan]/
[Zoom1] / [Zoom2] .
Clock Adjust the screen size.
Phase Adjust the focus of stable images.
Horizontal Position Move the image right or left.
Vertical Position Move the image up or down.
Auto Tune Automatically adjust the image settings such as position and phase.
DLC
Enhance the contrast ratio between light and dark areas of the picture.
You can select
On or Off . If this is set to On , Backlight cannot be
adjusted.
Picture Mode
Select your favourite picture mode for each input
/ [Soft] / [User].
[Dynamic]
[Standard] /
MEMC
Selects Low/Middle/High from to reduce motion blur, thus to improve
picture quality. Selects off to turn off this function.
Turn the Surround sound effect on or off. Surround
Treble
Adjust Treble (high sounds).
Bass
Adjust Bass (low sounds) .
Sound
Audio Only
Press OK to turn off the picture on your IFP and listen to the program audio only.
Balance Adjust volume level of right and left speakers.
AVC
Select [On] to equalize overall volume levels across all channels.
Select [Off] to turn off the auto volume control.
SPDIF Output Select the digital audio output mode for S/PDIF.
Select [RAW] to output audio signal as its original format.
Select [PCM] to output audio signal by PCM format.
(digital signal only)
Sound Mode Select your favourite sound mode for each input
[Alive] / [Standard] / [Music] /
[Movie] / [News] / [User] .
Setting the Mic. on or off. Mic. Enable
Adjust Mixed Rate. Mixed Rate