SETUP FOR: PS4
™
1. Charge the Freedom 1 Wireless headset before use.
To charge, connect one end of the micro-USB
cable to the headset and the other end into one
of the USB ports on your PS4
™
system. Once the
headset is fully charged, disconnect the micro-USB
cable. Charging takes approximately 2 hours.
2. Plug the USB dongle into one of the free
USB ports on your PS4
™
system.
3. Switch the Freedom 1 headset ON. If pairing does
not happen automatically, (indicated by a solid red
LED on both the USB dongle and headset), hold down
the power button until the LED on the USB dongle
starts to flash. Once they both become solid, pairing
is complete. This should be a very fast process.
4. The PS4
™
system allows you to select whether the
headset will output both game and chat sound together
or only chat. To switch between the two modes, use
your controller to navigate through the following
menus accessed via your PS4
™
: Settings > Devices >
Audio Devices. From here you can toggle between
‘All Audio’ and ‘Chat only’. If you only want to hear
other players communicating via PlayStation
™
Network,
please make sure that ‘Chat Only’ is selected.
5. From this same menu, set the volume at which your
PS4
™
sends sound to the headset to maximum, and
then set the sensitivity of the microphone. Test
the microphone’s function and click on OK before
leaving. Ideally set the microphone before starting
a game to be sure the level is set correctly.
6. Use the Voice Monitor button to toggle on
and off the ability to hear yourself.
7. Use the mute slider to toggle the microphone on and off,
so you can control when other players can hear you.
8. Use the volume controls on the side of the Freedom 1 to
cut or boost the volume of the speaker in the headset.
At maximum volume you will hear a beep tone.
9. When the Freedom 1 is running low on battery (which
can affect performance) you will hear a beep tone
every minute.
10
9
