copper
wire
*
Instructions to users
*
*
Make sure to have the professional after-sale service persons of our company or the authorized dealers to
install the units before you use.
1. The units are not to be installed at places where
there might be leakage of combustible gases.
Earth leakage-
circuit breaker
Make sure that the earth leakage-circuit breaker
is installed.
After the connecting of the wires between the indoor unit and the
outdoor unit, check whether the connecting is loose or not by pulling
the wire with a little force.
The loose connecting might result in fire hazard.
Instructions for Operation
S K
Do not press, stretch, damage, heat or modify the
power line.
It might cause electric shocks, overheating, fire
hazards, etc. If the power line wire is damaged or
needs to be replaced due to some other reasons,
please make sure to have dealer or the authorized
maintenance people to do the replacement.
Never try to stop the operation of the air conditioner
by operate the switch.
Such performance might cause electric shocks or fire hazards.
Do not operate the switch by wet hands.
It might cause electric shocks.
Never use the fuse with incorrect capacity or any
other metal wires.
The use of metal or copper wires for fuse might cause operational
failures or fire hazards.
Please read the "Instruction Manual" carefully prior to the use of your air conditioner so as to ensure proper operations.
Instructions for Installation
In case that the leaked gas accumulates around the units, there
might occur the accident of fire hazards.
Absence of the earth leakage-circuit breaker might lead to electric
shock and some other hazards.
1
OFF
ON
USER'S MANUAL
Split Wall-Mounted Air Conditioner
Make sure that the air conditioner is properly grounded.
The grounding wire on the air conditioner should be tightly connected to
the ground of the power source. Improper grounding might cause electric
shocks or other hazards.
