35
Victory Viper-3/Rev A/May 2003
www.pridemobility.com
I X . C A R E A N D M A I N T E N A N C E
LIGHT BULB REPLACEMENT
The scooters light bulbs are easily replaceable. Do not use regular automotive-type 12-volt light bulbs;
your scooter is equipped with a 24-volt electrical system. Replacement light bulbs can be purchased from
your authorised Pride Dealer.
NOTE: Use only 24-volt light bulbs.
n
Remove the light cover.
n
Gently remove the bulb by pulling it straight out.
n
Insert a new bulb of the same wattage.
n
Replace the light cover.
STORING YOUR SCOOTER
If you do not plan on using your scooter for an extended period of time, it is best to:
n
Fully charge its batteries prior to storage.
n
Disconnect the batteries from the scooter.
n
Store your scooter in a warm, dry environment.
n
Avoid storing your scooter where it will be exposed to temperature extremes.
For prolonged storage, you may wish to place several boards under the frame of your scooter to raise it off
of the ground. This takes the weight off the tyres and reduces the possibility of flat spots developing on the
areas of the tyres contacting the ground.
CONSOLE, CHARGER, AND REAR ELECTRONICS
n
Keep these areas free of moisture.
n
Allow these areas to dry thoroughly if they have been exposed to moisture before operating your scooter
again.
FUSE REPLACEMENT
In the event a fuse should cease to work:
n
Remove the fuse by pulling it out of its slot.
n
Examine the fuse to be sure it is blown. See figures 10 and 11.
n
Insert a new fuse of the proper rating.
WARNING! Always protect batteries from freezing temperatures and never charge a frozen
battery. This damages the battery and can cause personal injury.
WARNING! The replacement fuse must exactly match the rating of the new fuse. Failure
to use properly rated fuses may cause damage to the electrical system and may result in
personal injury.
