![Pride Quantum 1121 Owner'S Manual Download Page 34](http://html1.mh-extra.com/html/pride/quantum-1121/quantum-1121_owners-manual_1599901034.webp)
34
Quantum 1121
www.pridemobility.com
3. Remove the ball detent pin that secures the foot platform
to the frame. See figure 20.
4. Lift off the foot platform.
5. Locate the battery quick disconnects on the frame
and disconnect both of them. See figure 29.
6. Remove the batteries from the power base.
7. Disconnect the wiring harness from each battery.
8. Reinstall the wiring harnesses on each battery. Make
sure that you connect the red wire to the positive (+)
battery terminal and the black wire to the negative
(-) battery terminal. See figure 28.
WARNING! Make sure you tighten the
fasteners so that the connections are
secure.
9. Place the batteries back into the power base.
10. Connect the battery quick disconnects according the
to battery wiring diagram label. See figure 28.
11. Reinstall the foot platform.
When to See Your Quantum Rehab Provider for
Service
The following symptoms could indicate a serious prob-
lem with your power chair. If necessary, contact your
Quantum Rehab Provider. When calling, have the
model number, serial number, nature of the problem,
and the trouble code if available.
Motor noise
Frayed harnesses
Cracked or broken connectors
Uneven wear on any of the tyres
Jerky motion
Pulling to one side
Bent or broken wheel assemblies
Does not power up
Powers up, but does not move
V I I . C A R E A N D M A I N T E N A N C E
Figure 28. Battery Wiring Diagram Label
Figure 29. Battery and Harness
QUICK DISCONNECT
BATTERY
TERMINAL
Corrective Maintenance
If the battery condition meter does not light up when you turn on the power:
Check the harness connections. Make sure they ar tight.
Check the circuit breaker. Reset it if necessary.
Check the battery connections.
If the above conditions prove normal, you can load test the batteries with a battery load tester. These testers are
available at automotive parts stores. Disconnect both batteries before load testing and follow the directions that
come with the load tester. If either one of the batteries fails the load test, replace both of them. If your power
chair still does not power up, contact your Quantum Rehab Provider.