background image

The symbols below are used throughout this owner's manual and on the power chair to identify warnings and
important information. It is very important for you to read them and understand them completely.

WARNING! Indicates a potentially hazardous condition/situation. Failure to follow designated

procedures can cause either personal injury, component damage, or malfunction. On the

product, this icon is represented as a black symbol on a yellow triangle with a black border.

MANDATORY! These actions should be performed as specified. Failure to perform mandatory

actions can cause personal injury and/or equipment damage. On the product, this icon is

represented as a white symbol on a blue dot with a white border.

PROHIBITED! These actions are prohibited. These actions should not be performed at any time

or in any circumstances. Performing a prohibited action can cause personal injury and/or

equipment damage. On the product, this icon is represented as a black symbol with a red circle

and red slash.

Quick Reference Information

S A F E T Y   G U I D E L I N E S

Copyright © 2009
Pride Mobility Products Australia Pty. Ltd.
INFMANU3343/Rev B/February 2009

Quantum Rehab Provider:_________________________________________________________________

Address:_______________________________________________________________________________

Phone Number:_________________________________________________________________________

Purchase Date:__________________________________________________________________________

NOTE: This owner’s manual is compiled from the latest specifications and product information available at

the time of publication. We reserve the right to make changes as they become necessary. Any changes to our

products may cause slight variations between the illustrations and explanations in this manual and the product

you have purchased. The latest/current version of this manual is available on our website.

WARNING! A Quantum Rehab Provider or a qualified technician must perform the initial setup

of this power chair and must perform all of the procedures in this manual.

This product is manufactured by:

Pride Mobility Products Corp.

182 Susquehanna Avenue

Exeter, PA 18643

USA

Summary of Contents for Quantum 1121








































Reviews:

Related manuals for Quantum 1121