background image

Pathrider ES 10 

 www.pridemobility.com

   21

I I I .   Y O U R   S C O O T E R

REAR COMPONENTS

The batteries, anti-tip wheels, motor/transaxle assembly, main circuit breaker (reset button), and the

manual freewheel lever are located on your scooter as shown. 

See figure 7.

Figure 7. Rear Components

Batteries

The batteries store electrical energy that powers your scooter. See IV. “Batteries and Charging ” for infor-

mation on how to charge your scooter batteries.

Anti-Tip Wheels

The anti-tip wheels are an integral and important safety feature of your scooter. They are bolted to the

frame at the rear of the scooter.

PROHIBITED! Do not remove the anti-tip wheels or modify your scooter in any way that

is not authorised by Pride.

WARNING! The anti-tip wheels may cause interference with the smooth transition of your

scooter when ascending or descending a curb. Contact your authorized

 

Pride Provider for

more information.

Motor/Transaxle Assembly

The motor/transaxle assembly is an electromechanical unit that converts electrical energy from your

scooter’s batteries into the controlled mechanical energy that drives the scooter’s wheels.

BATTERY

BATTERY

MANUAL FREEWHEEL LEVER

MOTOR/TRANSAXLE ASSEMBLY

ANTI-TIP WHEELS

Summary of Contents for PATHRIDER ES10













































Reviews: