26
www.pridemobility.com
Jazzy Select 6
Armrest Width Adjustment
You can change each armrest’s width independently of
the other.
NOTE: Changing the armrest width may increase the
overall width of your power chair.
To change the armrest width:
1. Locate the two armrest knobs on each side of the
armrest receiver bracket. See figure 14.
2. Loosen the knobs.
3. Slide the armrests in or out to the desired width.
4. Tighten the knobs.
Armrest Angle Adjustment
To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicular to
the floor. See figure 14.
2. Loosen the locking nut.
3. Turn the adjusting screw to raise the front of the armrest
or to lower the front of the armrest.
4. Tighten the locking nut to lock the adjusting screw into
place.
Armrest Height Adjustment
To change the armrest height:
1. Loosen the setscrews on the armrest. See figure 14.
2. Raise or lower the armrest to the desired height.
3. Tighten the setscrews to secure the armrest.
Seatback Angle Adjustment
If your power chair is equipped with a limited-recline
seatback, you can adjust it to four (4) different angles: 90°,
102°, 105° or 107°.
To adjust the seatback angle:
1. Remove the adjusting screws from each seat hinge. See
figure 14.
2. Set the seatback at the desired angle.
3. Reinstall the adjusting screws to each seat hinge and
tighten.
Figure 14. Seatback/Armrest Adjustment
SEATBACK
ANGLE
ADJUSTMENT
SCREW
ARMREST
KNOB
LOCKING NUT
ARMREST
HEIGHT
ADJUSTMENT
SETSCREWS
ARMREST
ANGLE
ADJUSTMENT
SCREW
V . C O M F O R T A D J U S T M E N T S