Pride Jazzy 100 Owner'S Manual Download Page 30 | Manualshive

Page: 30 / 43

background image

30

www.pridemobility.com

Jazzy 100

V I I . O P E R A T I O N

Horn Key

The horn key activates the horn.

Locking/Unlocking the VSI

The VSI has a feature that enables you to lock your power chair to prevent unauthorized use.

To lock the VSI:

1. With the VSI switched on, press and hold the on/off key. After 1 second, the VSI should beep.
2. Release the on/off key.
3. Push the joystick to the full forward position until the VSI beeps.
4. Pull the joystick to the full rearward position until the VSI beeps.
5. Release the joystick. There should be a long beep.
6. The VSI is now locked.

To unlock the VSI:

1. Press the on/off key to power on the VSI. The maximum speed/profile indicator should ripple side to side.
2. Push the joystick to the full forward position until the VSI beeps.
3. Pull the joystick to the full rearward position until the VSI beeps.
4. Release the joystick. There should be a long beep.
5. The VSI is now unlocked.

NOTE: If the above procedure fails to either lock or unlock the VSI, contact your authorized Pride Provider.

Off-board Charger/Programming Socket

The off-board charger/programming socket is located on the front of the VSI. If you use an off-board charger, the charger
current should not exceed 8 amps. Contact your authorized Pride Provider for more information.

WARNING! Only chargers with Neutrik NC3MX plugs should be connected to the off-board charger/

programming socket. See your authorized Pride Provider for more information.

Actuator Connector

The actuator connector connects the VSI to optional powered systems such as an elevating seat or lighting system.

Controller Connector

The controller connector connects the VSI to the power chair’s batteries, motors, and motor brakes.

Charger Inhibit Connector

The charger inhibit connector connects the VSI to the onboard battery charger. This connection provides an inhibit that
disables the VSI when the battery charger is on. The charger inhibit connector is coded with colored dots. The dots are
positioned so that you align the flat side of the male connector with the flat side of the female connector before making the
connection.

WARNING! Failure to properly align the connectors can result in damage to the controller, the

charger, and the connectors.

«
...
28
29
30
31
32
...
»

Summary of Contents for Jazzy 100












































Reviews:

No comments

Related manuals for Jazzy 100

Brand: AccessRec Pages: 3

Brand: Sunrise Medical Pages: 24

Brand: Sunrise Medical Pages: 32

Brand: Sunrise Medical Pages: 36

Brand: Sunrise Medical Pages: 32

Brand: Sunrise Medical Pages: 20

QUICKIE Sedeo Pro

Brand: Sunrise Medical Pages: 116

QUICKIE SOPUR Easy 200

Brand: Sunrise Medical Pages: 196

Brand: Sunrise Medical Pages: 4

Brand: panthera Pages: 5

Brand: CHAMP MOBILITY Pages: 12

Brand: Dietz Pages: 152

Brand: Dietz Pages: 172

Brand: Permobil Pages: 45

COMFORT-PLUS DELUXE

Brand: Glide Pages: 20

Brand: Skil-Care Pages: 2

Brand: Sunrise Medical Pages: 92

Brand: LEADING CHAIR Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands