3.STRUCTURE AND PERFORMANCE
3.1 Power chair consists of several parts mainly(figure 1):
Chair-Frame: It consists of a foldable component, which can be folded
from the seatbase’s middle in order to store or transport conveniently.
Joystick: It has the function of moving forward, back, turning, speed
adjustment and etc.
Battery Box: It is located in the square tube of both sides. Each side
has one lithium battery of 24 Volt and 6.6AH/10AH with overload
protectors. There are two charger sockets for
the
batteries
,
one is
under the controller and another is on the upper of
the
battery box.
They
supply the power for motors.
Rear wheel:
The rear wheels are connected to the motors, used to
drive the wheelchair.
Front wheel: to support the wheelchair and keep it safe and steady.
3.2 Product characteristics of the electric wheelchair
Classification according to prevent electric shock type : internal power
supply
Classification according to prevent electric shock level : type B applied
part Wheelchairs are non-AP or APG-type device.
Classification according to the operation pattern classification: run
continuously.
The power of the equipment : internal power DC 24V
3.3 ELECTRICAL DIAGRAM OF MODEL 5513
push handle
joystick
armrest
seat base
battery
motor with mechanism
drive wheel
caster
footrest
图一
Suspension spring
motor lock lever
5
6
CONTROLLER
CONNECTORS FOR RIGHT MOTOR
CONNECTORS FOR BATTERY
CONNECTORS FOR LEFT MOTOR
RIGHT MOTOR
RIGHT BRAKE
LEFT BRAKE
LEFT MOTOR
JOYSTICK
III.STRUCTURE AND PERFORMANCE
III.STRUCTURE AND PERFORMANCE
24V LITHIUM BATTERY
figure 1
Summary of Contents for I-Go 5513
Page 1: ...Castricummer Werf 26 1901 RW Castricum The Netherlands TM ...
Page 11: ......
