background image

Please note:
  This power chair is an electrical, non-aseptic, reusable product without 
chemical substances
The safety and durability of this product depends not only  on the  structural 
strength of products, but also on the user usage and use of the product 
environment, user habits,  whether the periodic maintenance, maintenance 
and other factors are followed .
  Our products are warranted from the date of production for 7 years. 
(production date on inspection certificate).
2.1 Instructions before using
2.1.1 If the user manual is not completely read and understood, please do 
not drive.
2.1.2 The maximum loading capacity is 100kg, please do not drive 
overloaded . And it is for single use, please do not carry passengers. 
2.1.3 Please do not drive  after consuming alcohol or when tired.
2.1.4 Do not drive at night or in the case of an unclear line of sight.
2.1.5 Please self-test before driving and refer to the manual section 5.3 
"Commissioning" and  6.2.1 "Practice before operation " if driving for the 
first time.
2.1.6 This chair is not waterproof, do not expose in rain and snow as well as 
driving in rain or snow.
2.2 Notices for use
2.2.1 This power chair can drive on a good smooth surface, but will not 
perform optimal on muddy, soft, or icy roads.
2.2.2 This power chair has the ability of riding over a ditch or obstacle,when 
doing this you should reduce the speed and travel slowly. 
2.2.3 This power chair can climb slopes of maximum 6

°

.

2.2.4 Please avoid driving in the crowds, traffic and other places with heavy 
traffic.
2.2.5 Please ensure that the motor lock lever in “Electric” position, chair is 
on electric mode.

WARNING!

If your wheelchair moves accidentally, please immediately 

release the joystick so that the wheelchair will stop moving

 automatically. If the joystick is 

malfunctioning and the brakes 

don't respond

, please cut off the power. 

2.3 Electromagnetic interference
Your wheelchair may be traveling in the areas affected by electromagnetic 
interference from some radio transmitters such as radio, wireless intercom,
 mobile phones and radars etc. In these cases, your wheelchair’s driving 
may be affected by them.

WARNING!  Electronic equipment can be affected by 

Electro-Magnetic Interference(EMI). Such interference 

may be from radio stations, TV stations, mobile phones 

and other radio transmitters. If the wheelchair exhibits 

abnormal situations due the wheelchair, and consult your 

service agent. We accepts no legal liability for losses of

 any kind arising from failure to comply with this condition. 

2.2.6  Please ensure that the controller system fixed well, joystick is 
straight and correct. Sit comfortably and fasten the lap belt. Sit back 
against the backrest, this helps with stability on oneven roads. 2.2.7 
Press the on/off button, firstly check whether the current fastest 
speed setting is appropriate for your operating proficiency, or it 
should be adjusted for safety. We recommend that the user should 
drive slowly in the beginning for every use, and gradually speed up.

3

4

II. ATTENTION

II. ATTENTION

Summary of Contents for I-Go 5513












Reviews: