Pride CL10KD, Owner'S Manual, Page: 15 / 32

Lift Chair Series www.pridemobility.com 15
LIFT CHAIR SERIES
HEAT CONNECTION
TO JUNCTION BOX
LIFT CHAIR DISASSEMBLY
The back portion of KD Lift Chairs can be removed to make service and transport of the chair more convenient.
Follow these steps to disassemble the lift chair:
IV. ASSEMBLY/DISASSEMBLY
4.3.1 Remove the bottom of the back fabric from
the hook and loop flaps on the chair base.
4.3.2 For units equipped with heat and/or massage
options, disconnect the heat and massage
connectors from the junction box.
4.3.3 Using a large flat-head screwdriver, lift the
left and right locking clips on the chair-back
one side at a time to raise the back from the
connections on the chair base. As you lift
each locking clip, pull up on the chair-back to
lift that side over the lock.
4.3.4 Lift the chair-back up and away from the
chair base.
MASSAGE
UNIT
MASSAGE
UNIT
JUNCTION
BOX